Remo CL-1122-P3 Powerstroke® P3 Coated Classic Fit Bass Drumhead, 22″
POWERSTROKE® P3 COATED CLASSIC FIT
The Powerstroke® P3 Classic Fit Drumheads provide a larger inner diameter design with a narrower flesh hoop and step design to address older vintage drums that are out of round with thick overlapping drum coverings. Vintage Drums that have a thick overlapping seam will interfere with the drumhead flesh hoop, keeping it from moving down over the seam and not allowing the drumhead film to rest on the bearing edge. If the standard drumhead is forced over the shell it will not resonant freely and cause wrinkles in the drumhead film. Classic Fit Drumheads provide a solution to these issues providing a specially designed head that allows proper fit, seating and tuning for even the most challenging vintage drums. Available in Powerstroke®P3 Clear, Ambassador® Coated and Ebony®, and Diplomat® Fiberskyn®. Bass sizes 18”, 20” and 22”.
Evans BD18EMADCW 18″ EMAD 1-Ply 10mil Bass Batter Coated Drumhead
EMAD™
Tailor degrees of damping and attack
without removing the head or reaching
inside the drum. is a 10mil single-ply head
with two interchangeable damping rings that
maximize attack and low-end. The coating adds
additional warmth, focus, and depth.
Evans BD22EMADHW 22″ 2-Ply 10mil Heavyweight Batter Clear Drumhead
EMAD™ Heavyweight
The EMAD Heavyweight features two identical
plies of high-performance 10mil film combined
with the groundbreaking EMAD system
to provide maximum attack, low-frequency
response, and ultimate durability.
Evans BD22UVEMAD 22″ 10mil Bass Batter w/UV Cured Coating
The UV1 series is designed for the widest range of sonic possibilities while remaining the most durable single-ply drumhead
available. The patented UV-cured coating provides unmatched durability and consistency of texture, while the unique 10mil
film delivers exceptional strength and versatility for a full range of musical applications. Standard UV1s feature the same
durable 10mil, single-ply film featured on the tom heads. The UV EQ4 has a fixed internal overtone control ring that reduces
sustain and focuses the tonal response of the drum, while the EMAD version has the benefit of adjustable damping for added
attack and focus.
Evans BD22REMAD 22″ 10mil Bass Resonant Head
EMAD™ Resonant
A 10mil head with a fixed internal ring, the EMAD Bass Resonant features an improved
ring design. Like the EMAD batter, a black plastic sleeve holds in place a foam damping
ring that controls overtones around the edge of the 4” offset port, focusing the pitch and
enhancing attack. The ring also provides protection for the mic port.
Evans BD22EMADCW 22″ EMAD 1-Ply 10mil Bass Batter Coated Drumhead
Tailor degrees of damping and attack
without removing the head or reaching
inside the drum. is a 10mil single-ply head
with two interchangeable damping rings that
maximize attack and low-end. The coating adds
additional warmth, focus, and depth.
Toca TP-FHM9 9″ Goatskin Djembe Head
Toca TP-FHM9 9” Goat Skin Head for Mechanically Tuned Djembe
Remo PR-1420-00 20″ Powerstroke Pro Ebony Bass Drum Batter Drum Head
DESCRIPTION
The Powerstroke Pro Ebony features enhanced midrange and low frequency tones with added attack and projection. Constructed with 1-ply of 10-mil Ebony film with our pressure dampening profile and permanently mounted acoustic foam. This provides maximum volume and projection, while producing controlled highs, enhanced midrange and low frequency tones.
• Ideal for Pop, R&B and Rock applications
• Available in sizes 18″ – 24″
• 1-ply 10-mil Ebony film with Remo’s pressure dampening profile
• Features Remo’s pressure dampening profile and permanently mounted acoustic foam
• Enhanced midrange and low frequency tones with added projection
Evans B160NX2 16″ Onyx Drum Head-two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
Two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
Evans B140NX2 14″ Onyx Drum Head-two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
Two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
Evans B130NX2 13″ Onyx Drum Head
Two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
Evans B120NX2 12″ Onyx Drum Head-two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
Two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
Evans B100NX2 10″ Onyx Drum Head-two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
Two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
Evans B080NX2 8″ Onyx Drum Head
Two plies of 7.5mil film that will deliver enhanced durability while making the drums cut live. A frost coating gives the Onyx heads a matte black appearance and increases low-end response and attack.
