Quilter BLOCKDOCK-10TC 100 Watt 1×10″ Guitar Speaker Cabinet
It’s light and loud, so it must be a Quilter! Weighing in at only 15 pounds (6.8 kg) it is the perfect compact companion for your favorite 101-series amplifier head. The 10-inch, 100W driver has a bright chiming tone, and is front mounted in a one-piece light-ply cabinet for rugged rattle-free performance. The dual-angle cabinet fires forward or rocks back for close-up monitoring,
Watch the look of shock when someone hears your BlockDock 10TC, loaded with a 101 Series amplifier, and realizes the whole rig weighs only 17 lbs. The weight-optimized Celestion TF-1018 is a bigger version of our widely acclaimed MicroPro 8-inch speaker, with the same big clear sound. Pairs best with a 101 series head, but it can also accept a 200W head with suitably reduced Master volume. Pro-audio cabinet design and custom dust cover with pouch assure trouble free transport and long service life.
(Amplifier sold separately-shown for informational purposes only)
https://youtu.be/SSDpNlKCpn4
Ashdown Engineering OR-110 150W 1×10″ Lightweight Bass Cabinet
The OR-110 is a front-ported lightweight 8 Ohm 1 x 10″ bass cabinet with a custom designed Ashdown speaker. The cab is constructed of premium lightweight ply to cut the weight and wadded to dampen specific frequencies while the tuned reflex port allows for front dispersion resulting in surprisingly deep bass and volume from such a small cabinet. A perfect solution for those needing a great sounding, lightweight, compact and portable cabinet. Rated at 150 watts at 8 ohms the OR-110 is one of the most portable bass cabinets on the market. There is a top mounted grab handle positioned to offset the weight of the speaker magnet for ease of transport. A robust steel kick proof grille protects the speaker from any possible damage when on the move and tough carpet covering means this cab will continue to look great for years to come. Neutrik Combi sockets allow connection either via speakon cable or a standard 1/4″ jack speaker cable.
- H: 360mm (14.1″)
- W: 390mm (15.3″)
- D: 360mm (14.1″)
- Weight: 10.7KG (23.5lbs)
- Power: 150w
- Impedance: 8Ohms
Laney Ritcher R410 Bass Cabinet 4×10″
Super-efficient bass cabinet
The R115 is a compact, high efficiency 1×15 bass enclosure and is the ideal extension cabinet to Laney R500H head and RICHTER combo models. Loaded with 1 x 15″ Custom Driver + Switchable HF horn and delivering 400 Watts @ 8 Ohms, the dual front-ported design delivers full, powerful bass tone.
Laney Ritcher Bass R115 Bass Cabinet 1×15
Super-efficient bass cabinet
The R115 is a compact, high efficiency 1×15 bass enclosure and is the ideal extension cabinet to Laney R500H head and RICHTER combo models. Loaded with 1 x 15″ Custom Driver + Switchable HF horn and delivering 400 Watts @ 8 Ohms, the dual front-ported design delivers full, powerful bass tone.
Laney NEXUS N210 300-Watt 8ohm 2×10″ Bass Speaker Cabinet
The ultimate in big bass tone
The NEXUS N210 cabinet is an ultra-light, high performance bass enclosure, loaded with neodymium drivers and finished in Laney’s Tuffstuff coating, the NEXUS N210 has been designed to be used in conjunction with the NEXUS-SL and SLS bass head. The N210 is loaded with 2 x LaVoce neodymium 10” drivers plus a La Voce 1″ exit compression driver which is switchable to on/off and half power settings. Selected exclusively for the NEXUS range, these Italian-designed speaker components are truly outstanding for bass. The lightweight, heavy duty, plywood cabinet is then finished in Laney’s Tuffstuff: An incredibly tough, ultra-durable and resilient polyurethane coating designed to deal with the rigours of life on the road.
Laney N115 Nexus Bass Cabinet 1x15in Neodymium Driver 400 Watts 8 Ohms
The ultimate in big bass tone, the NEXUS N115 cabinet is an ultra light, high performance bass enclosure, loaded with neodymium drivers and finished in Laney’s Tuffstuff coating. The NEXUS range represents Laney’s dedication to cutting-edge, great-sounding bass backline.
British Engineering
The NEXUS N115 has been designed to be used in conjunction with the NEXUS-SL bass head. The N115 is a state of the art bass enclosure – designed and tuned to meet the most hardcore bass demands.
Ultra Light
This compact cabinet is amazingly lightweight at only 19.5kg, but its performance is huge.
Neodymium
The N115 is loaded with a LaVoce neodymium 15″ driver plus a La Voce 1″ exit compression driver which is switchable to on/off and half power settings. Selected exclusively for the NEXUS range, these Italian-designed speaker components are truly outstanding for bass.
Tuffstuff
The lightweight, heavy duty, plywood cabinet is then finished in Laney’s Tuffstuff: An incredibly tough, ultra-durable and resilient polyurethane coating designed to deal with the rigours of life on the road.
Product Specifications:
• Cabinet Design: Lightweight Heavy Duty Plywood Cabinet, Covered With ~tuff Stuff’
• Drivers: 1×15″ Neodymium Driver, 1″ Exit Compression
• Frequency Response: 35hz – 20khz
• Inputs: 2 X Neutrik Speakon Connectors – Input & Link
• Impedance: 8 Ohms
• Packed Dimensions (Hxwxd Mm): 440x580x400
• Power: 400 Watts Rms
• Unit Dims – For Int. Case (Hxwxd Mm): 440 X 580 X 400
• Weight: 19.5lbs
Laney GS412VR 240W 4×12 Guitar Speaker Cab
Where tone comes to life
The unique interaction between a tube amplifier and its loudspeaker is how tone comes to life. A 4×12 loaded cabinet moves a lot of air and lets you feel what you are playing – the GS412VR is no exception! The GS412VR is loaded with four of the world famous Celestion Vintage 30’s giving a high-end tone that every guitar player on the planet can appreciate. Tube amps produce a hugely varied and detailed tone, the GS412VR is designed to deliver the complex overtones, low-end warmth, rich mid-range and beautifully detailed top-end associated with high quality tube amps and is particularly well suited to the GH range. The GS412VR can be used with any tube amp. Built from the best quality plywood available to maintain a portable yet rugged construction, the GS412VR can be used in with mono or stereo operation which makes it ideal for a compact stereo rig on stage.
Celestion Vintage 30 driver
The Celestion Vintage 30 is an industry standard speaker used to capture many of the classic guitar performances. The Vintage 30 features detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand- wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch.
- Ergonomic side mount grab handles
- 240 Watts in mono or 2 x 120 watts in Stereo
- Stereo/Mono switch
- Slip cover supplie