Seymour Duncan 11900-003 Guitar Pickup Booster Pedal, Red
The Pickup Booster is for when you love the sound of your guitar but you need a little more: more output, more gain or just a little more control over your guitar’s voice without changing its fundamental character. Think of it as sending your guitar to the gym. A true-bypass pedal with a class A, low-noise circuit design, Pickup Booster can be used to dial in the tone you need for every situation. It will emphasize your guitar’s natural tone while adding some muscle and fatness. It uses a discrete push-pull output stage for increased drive capability, so even with the Gain knob down to 0dB your signal chain will sound cleaner – even with long cable runs – essentially acting as a buffer on your pedalboard. Need a humbucker sound out of that vintage Strat? The Resonance Switch makes the pedal interact directly with your pickups, allowing your single coils to emulate either a chunky humbucker sound perfect for classic rock or blues or a high-output tone for rip-roaring solos. If you’re using humbuckers, Position 1 will give your guitar a little more ‘teeth,’ while Position 2 gives you a hint of that ‘cocked-wah’ tone filter vibe which is great for leads. Like all of our pedals, Pickup Booster is designed and assembled at our Santa Barbara, California factory by the same team responsible for our legendary pickups.
Type of circuitry: Fully discrete, Class A
Gain range: 0 to 25 dB
Bypass: True bypass
Pickup Resonance Switch: Makes a single coil pickup sound like a vintage humbucker (“1”) or
high output humbucker (“2”).
Frequency Response: -3dB at 30Hz and 38 kHz
Distortion: < 0.02% at 200mV RMS output
Noise: -120 dBV (referred to input with gain set at 25dB)
Input impedance: 250K Ohms (when effect is “on”)
Output impedance: 150 Ohms
Power: 9V battery or external 9 to 18V Regulated DC Adapter (center negative)
Current consumption: 4.5mA @ 9V (when LED is “on”), 3mA @ 9V (when LED is “off”).
Currents at 18V are 11mA and 8mA, respectively.
Dimensions: 2.61” X 4.90” X 1.45”
Weight: 0.8lb. without battery
Oscar Schmidt OS-30-SFG-A 3/4 Size Seafoam Green Kids Jr. Strat-Style Electric Guitar
The OS30 is a classic guitar that’s stood the test of time. The classic tones of Hendrix, Vaughn, Clapton, Beck, Knopfler and so many more. The OS30 is a 3/4 size version perfect for beginning young players with smaller hands.
Double cutaway body
White pickguard
Maple neck
Rosewood fingerboard
Dot inlays
Adjustable truss rod
Chrome hardware
Standard fulcrum tremolo bridge
3 single coil pickups
1 volume, 2 tone controls
5-way pickup selector
Chrome diecast tuners and hardware
Gloss finish
OS30 is 3/4 size
D’Addario NYXL1164 Medium 7-String Electric Guitar Strings 11-64
NYXLs will bend farther, sing louder, and stay in tune better than any string you’ve played before. As our premium uncoated electric string, NYXLs offer higher break strength, enhanced tuning stability, and accentuated mid-range frequency response, providing more presence and crunch to cut through the mix. Made with a NY Steel core, premium nickel-plated steel wrap wire, and Fusion Twist technology, NYXL electric guitar strings are tough enough and versatile enough to handle anything. This 11-64 Medium 7-String set is designed with larger gauges for moderate flexibility and a full tone.
D’Addario NYXL1059 Regular Light 7-String Electric Guitar Strings 10-59
NYXLs will bend farther, sing louder, and stay in tune better than any string you’ve played before. As our premium uncoated electric string, NYXLs offer higher break strength, enhanced tuning stability, and accentuated mid-range frequency response, providing more presence and crunch to cut through the mix. Made with a NY Steel core, premium nickel-plated steel wrap wire, and Fusion Twist technology, NYXL electric guitar strings are tough enough and versatile enough to handle anything. This 10-59 Medium 7-String set is designed with larger gauges for moderate flexibility and a full tone.
NUX MIGHTYLITEBT-MKII 3W Portable Desktop Modeling Combo Guitar Amp, Black
The MIGHTY LITE BT MKII provides a variety of effects for electric guitar and bass guitar including amp modeling and cabinet IRs. It also comes with acoustic amp modeling and acoustic IRs to let you simulate acoustic guitar tones. And, you can even load 3rd party IRs through Mighty Editor™ edit software to expand your tone. (You can load any WAV format IRs, the Mighty Editor™ will convert to 32bits/48kHz onto the device automatically.)
3 watts desktop Modeling Amplifier.
TSAC-HD (White-Box) Amp Modeling algorithm offers realistic playability & feedback.
512 samples IR resolution. (34 premium built-in IRs and 20 user slots for 3rd party)
7 presets with ACTIVE functions. (PRESET switch toggles ACTIVE ones sequentially.)
7 effect blocks: GATE, EFX, AMP, IR, MOD, DLY, RVB.
White-box algorithm EFX offers analog response and natural chaos.
Patch Level function for each preset.
Drum machine.
Intuitive MightyAmp™ APP & Mighty Editor™ edit software(3rd party IR loader).
USB-C: Mighty Editor™ edit software communication, USB audio stream, and Firmware update.
Input Impedance 680KO
AUX In Impedance 13KO
Earphone Output Impedance 32O
Sampling Rate 48KHz/32-bit
System Latency 1.42ms
Current Draw 9VDC/Battery 120mA, USB 185mA
Speaker 3”, 4O, 5W
Dimensions 166 (L)X98 (W)X124 (H)mm
Weight 720g
Sire P5-ALDER-4-2NDGEN-TS Bass Guitars Marcus Miller P5 Electric Bass, Tobacco Sunburst
Living Legend and His Bass Marcus Miller and SIRE wishes to see everyone enjoying and playing music.To make this happen, Marcus Miller and SIRE have been on a mission for the past several years to build the best quality bass at an unbelievable price, making it available to everyone.The result is a new line of Marcus Miller bass models that have an amazing sound, fantastic new look, and are high quality but with an extraordinary low price.We are ecstatic that SIRE Marcus Miller basses are now available to everyone with a new hope that more people will be able to play and enjoy the music they love. Indonesian Mahogany Body and Canadian Hard Maple Neck. The M2 body is made with Indonesian Mahogany which is known for its warm, clear, full-bodied sound. The neck is made with Canadian Hard Maple for a premium look and feel. Marcus Miller Heritage-3 Preamp System Top notch 3-band EQ preamp newly developed for this series in order to meet the needs of Marcus Miller’s versatility and to cover various styles of music. Rolled Fretboard Edges What only custom shops can achieve, is now on the Sire 2nd Gen. These rounded edges will give users a firmer and more natural grasp compared to other typical fretboards. Highest Quality Hard & Clear Paint The M2 is coated with the highest quality paint that is also used in the V7 and M7 series. This gives the M2 a more elegant look compared to other introductory basses that are applied with low-cost paints.
Body Material : Mahogany
Body Shape : New Modern Bass
Body Color : TBK
Neck Material : Canadian Hard Maple
Neck Shape : C-ShapeScale : 34″
Neck Joint : 4 Bolt Indivisual Bushing Type
Fingerboard(Rolled Edges) : Rosewood (TBK, WH.P) / Maple(TBL)
Fingerboard Radius : 12”
Frets : Medium, 24 Frets
String Nut : 4 String – PPS Tusk Black 38mm width / 5 String – PPS Tusk Black 45mm width
Binding : None
Inlay : White Pearl Dot
Pickups : Marcus Blue Humbucker Set
Electronics : Marcus Miller Heritage-3 with Middle Frequency Control
Controls : Volume / Tone(Dual Pot) | Pickup Blender | Treble | Middle / Middle Frequency(Dual Pot) | Bass, Mini Toggle(Active / Passive)
Knobs : Modern Black Plastic
Bridge : Marcus Standard Bass Bridge with Body Thru Hole Option
Tuning Gear : Basic Diecasting Gear
Hardware Finish : Black
Pickguard : None
Sire P5-ALDER-4-2NDGEN-DRD Bass Guitars Marcus Miller P5 Electric Bass, Dakota Red
Living Legend and His Bass Marcus Miller and SIRE wishes to see everyone enjoying and playing music.To make this happen, Marcus Miller and SIRE have been on a mission for the past several years to build the best quality bass at an unbelievable price, making it available to everyone.The result is a new line of Marcus Miller bass models that have an amazing sound, fantastic new look, and are high quality but with an extraordinary low price.We are ecstatic that SIRE Marcus Miller basses are now available to everyone with a new hope that more people will be able to play and enjoy the music they love. Indonesian Mahogany Body and Canadian Hard Maple Neck. The M2 body is made with Indonesian Mahogany which is known for its warm, clear, full-bodied sound. The neck is made with Canadian Hard Maple for a premium look and feel. Marcus Miller Heritage-3 Preamp System Top notch 3-band EQ preamp newly developed for this series in order to meet the needs of Marcus Miller’s versatility and to cover various styles of music. Rolled Fretboard Edges What only custom shops can achieve, is now on the Sire 2nd Gen. These rounded edges will give users a firmer and more natural grasp compared to other typical fretboards. Highest Quality Hard & Clear Paint The M2 is coated with the highest quality paint that is also used in the V7 and M7 series. This gives the M2 a more elegant look compared to other introductory basses that are applied with low-cost paints.
Body Material : Mahogany
Body Shape : New Modern Bass
Body Color : TBK
Neck Material : Canadian Hard Maple
Neck Shape : C-ShapeScale : 34″
Neck Joint : 4 Bolt Indivisual Bushing Type
Fingerboard(Rolled Edges) : Rosewood (TBK, WH.P) / Maple(TBL)
Fingerboard Radius : 12”
Frets : Medium, 24 Frets
String Nut : 4 String – PPS Tusk Black 38mm width / 5 String – PPS Tusk Black 45mm width
Binding : None
Inlay : White Pearl Dot
Pickups : Marcus Blue Humbucker Set
Electronics : Marcus Miller Heritage-3 with Middle Frequency Control
Controls : Volume / Tone(Dual Pot) | Pickup Blender | Treble | Middle / Middle Frequency(Dual Pot) | Bass, Mini Toggle(Active / Passive)
Knobs : Modern Black Plastic
Bridge : Marcus Standard Bass Bridge with Body Thru Hole Option
Tuning Gear : Basic Diecasting Gear
Hardware Finish : Black
Pickguard : None
Sire M2-4-2NDGEN-TBL Marcus Miller M2 4 String 2nd Generation, Trans Blue
Marcus Miller and SIRE wishes to see everyone enjoying and playing music.To make this happen, Marcus Miller and SIRE have been on a mission for the past several years to build the best quality bass at an unbelievable price, making it available to everyone.The result is a new line of Marcus Miller bass models that have an amazing sound, fantastic new look, and are high quality but with an extraordinary low price.We are ecstatic that SIRE Marcus Miller basses are now available to everyone with a new hope that more people will be able to play and enjoy the music they love.
Body Material : Mahogany
Body Shape : New Modern Bass
Body Color : TBK, WHP, TBL
Neck Material : Canadian Hard Maple
Neck Shape : C-ShapeScale : 34?
Neck Joint : 4 Bolt Indivisual Bushing Type
Fingerboard(Rolled Edges) : Rosewood (TBK, WH.P) / Maple(TBL)
Fingerboard Radius : 12”
Frets : Medium, 24 Frets
String Nut : 4 String – PPS Tusk Black 38mm width / 5 String – PPS Tusk Black 45mm width
Binding : None
Inlay : White Pearl Dot
Pickups : Marcus Blue Humbucker Set
Electronics : Marcus Miller Heritage-3 with Middle Frequency Control
Controls : Volume / Tone(Dual Pot) | Pickup Blender | Treble | Middle / Middle Frequency(Dual Pot) | Bass, Mini Toggle(Active / Passive)
Knobs : Modern Black Plastic
Bridge : Marcus Standard Bass Bridge with Body Thru Hole Option
Tuning Gear : Basic Diecasting Gear
Hardware Finish : Black
Pickguard : None
Sire M2-4-2NDGEN-TBK Marcus Miller M2 4st 2nd Generation Bass, Transparent Black
Living Legend and His Bass Marcus Miller and SIRE wishes to see everyone enjoying and playing music.To make this happen, Marcus Miller and SIRE have been on a mission for the past several years to build the best quality bass at an unbelievable price, making it available to everyone.The result is a new line of Marcus Miller bass models that have an amazing sound, fantastic new look, and are high quality but with an extraordinary low price.We are ecstatic that SIRE Marcus Miller basses are now available to everyone with a new hope that more people will be able to play and enjoy the music they love. Indonesian Mahogany Body and Canadian Hard Maple Neck. The M2 body is made with Indonesian Mahogany which is known for its warm, clear, full-bodied sound. The neck is made with Canadian Hard Maple for a premium look and feel. Marcus Miller Heritage-3 Preamp System Top notch 3-band EQ preamp newly developed for this series in order to meet the needs of Marcus Miller’s versatility and to cover various styles of music. Rolled Fretboard Edges What only custom shops can achieve, is now on the Sire 2nd Gen. These rounded edges will give users a firmer and more natural grasp compared to other typical fretboards. Highest Quality Hard & Clear Paint The M2 is coated with the highest quality paint that is also used in the V7 and M7 series. This gives the M2 a more elegant look compared to other introductory basses that are applied with low-cost paints.
Body Material : Mahogany
Body Shape : New Modern Bass
Body Color : TBK
Neck Material : Canadian Hard Maple
Neck Shape : C-ShapeScale : 34″
Neck Joint : 4 Bolt Indivisual Bushing Type
Fingerboard(Rolled Edges) : Rosewood (TBK, WH.P) / Maple(TBL)
Fingerboard Radius : 12”
Frets : Medium, 24 Frets
String Nut : 4 String – PPS Tusk Black 38mm width / 5 String – PPS Tusk Black 45mm width
Binding : None
Inlay : White Pearl Dot
Pickups : Marcus Blue Humbucker Set
Electronics : Marcus Miller Heritage-3 with Middle Frequency Control
Controls : Volume / Tone(Dual Pot) | Pickup Blender | Treble | Middle / Middle Frequency(Dual Pot) | Bass, Mini Toggle(Active / Passive)
Knobs : Modern Black Plastic
Bridge : Marcus Standard Bass Bridge with Body Thru Hole Option
Tuning Gear : Basic Diecasting Gear
Hardware Finish : Black
Pickguard : None
Cort EARTH-BEVELCUT-OP Earth Series Acoustic Guitar with Bevel Cut, Open Pore
Featuring an arm bevel-cut on the body top of the Cort Earth model, the Earth Bevel Cut features an ergonomic body contour for a comfortable posture and performance an an decent price level.
SOLID SITKA SPRUCE TOP
Spruce provides an ideal balance between strength and flexibility, hence its overwhelming popularity as the wood of choice for tops of acoustic guitars. Spruce’s versatile sonic character makes it ideal for a variety of musical genres and playing styles.
MAHOGANY BACK & SIDES
Bright yet natural with a strong and warm midrange, the beloved mahogany wood has been a standard for back and sides on premium acoustics for many decades.
BEVELED ARMREST
A set of player-friendly touches like a new beveled cutaway and an armrest for an unmatched blend of sound and feel.
OPEN PORE FINISH
Not only does the open pore finish enhance the resonance of the woods but it also reduces the weight of the guitar for improved playability.
SCOOPED BRIDGE
The exclusive scooped surface bridge from Cort enhances sustain with greater string angle from the saddle to the body while reducing tension on the strings across the neck were less finger fatigue and improved playability.
DIE-CAST TUNERS
The diecast machine heads provide tuning stability as well as rock-solid functionality.
CONSTRUCTION Dovetail Neck Joint
BODY Dreadnought
NUT WIDTH 43㎜(1 11/16″)
TOP Solid Sitka Spruce
BACK & SIDES Mahogany
NECK Mahogany
FRETBOARD Ovangkol
FRETS 20
SCALE 643㎜(25.3″)
INLAY Dot
TUNERS Die-Casting
ROSETTE Herringbone
BRIDGE Ovangkol
STRINGS D’Addario® EXP16
BRACING Advanced X-Bracing
