Enki Gen 3 ENKI AMG-2 Electric Guitar Case
The New Gen 3 ENKI AMG-2 Guitar Case is a revolutionary 2 electric guitar case offering solid airline-safe protection and travel convenience for touring musicians. Most touring guitar players are carrying multiple guitars and are in need of a case offering a higher level of protection with the ability to easily roll the case into the venue. To keep your babies safe, the Gen 3 ENKI AMG-2 Guitar Case is constructed with an incredibly tough lightweight Roto-Molded Polyethylene shell encasing a luxurious 2 electric guitar modular soft case insert. The AMG-2 Guitar Case is designed to hold most electric guitars with a standard body shape. Guitars can be accessed either horizontally or vertically with the use of a single 304 SS latch. In addition to delivering superior protection, the AMG-2 Guitar Case doubles as a guitar rack when stood vertically – perfect for the stage!
Key Features
• Roto-Molded Polyethylene Shell
• New! Luxurious 2 Electric Guitar Modular Soft Case Insert
• Solid Axle Smooth Glide Wheels
• Removable Lid Design
• Padlock Plate
• Soft EVA Accessories Case
• Limited Lifetime Warranty
Dimensions- 47.5″ x 18″ x 10.5″
Weight- 23.5lbs
Pacific Drums and Percussion PDCMX2215WC Concept Maple Exotic 5-Piece Shell Pack Charcoal Burst Over Walnut
Step Up to Concept Series™ Maple Exotic Drums. The PDP Concept Series™ introduced drummers to original, boutique-style drums with professional-grade features. Drum Workshop has become synonymous with incorporating exotic wood veneers in their high-quality drum shells. So, PDP brought these two innovations together to bring you our Concept™ Maple Exotics. Hardware and cymbals not included. Each sold separately. Concept™ Maple Exotics drums are constructed with maple shells, wrapped in an outer veneer of rich walnut, and finished with a glossy, Charcoal Burst lacquer so, you can count on these drums to turn heads wherever they go. Then, the Concept™ Exotics offer the same, pro-level features as their Concept™ Maple and Birch cousins. The 7-ply Concept™ Fast Toms™ come in our F.A.S.T. (Fundamentally Accurate Sized Toms) sizes, so each Fast Tom® is built for maximum resonance. The rack toms utilize DW’s advanced Suspension Tom Mounts (STMs), while the floor toms stand on our strong, resonant legs. The 10-ply snares include the trusted MAG throw-off, along with fully-chromed snare wires, featuring carbon steel coils and brass end plates. The 7-ply bass drums are built with die-cast, low-mass claw hooks. Finally, just like all Concept™ drums, the Concept™ Exotics are made with DW’s True Pitch tension rods, graduated counterhoop thicknesses, our retro-inspired, dual-turret lugs, and world-renowned Remo drum heads. And the sound? Concept™ Exotics fill the room with extraordinary warmth and projection. They are also customizable with add-on toms to adapt to a wide variety of musical styles. Want to get attention with your look and sound? Try the Concept™ Maple Exotics and you’ll quickly understand why so many drummers are flocking to PDP.
Shell sizes: 8×10, 9×12, 14×16, 18×22, 5.5×14
Randall RG8 35W 1×8 Guitar Speaker Cabinet Black
The RG8 is a 35 watt “mini cab” with a steel grill and an 8″ RS8-35-8 speaker. This is a perfect fit for smaller amplifier heads.
SPECIFICATIONS
ELECTRONICS
Wattage
35 watts
Impedance
8Ω mono
GENERAL
Speaker
1 x RS8-35-8
Dimensions
11.34 x 11.65 x 7.56 inches
Weight Lbs
14.3 lbs
Ditson 000C-10E Orchestra 14 Fret Cutaway Acoustic Electric Guitar, Satin
Body: 000-14 fret, cutaway
Top: Sitka Spruce
Back & Sides: Mahogany
Neck: Mahogany, low profile
Fingerboard: Laurel
Scale Length: 24.9” (632 mm)
Width at nut: 43 mm
Finish: Satin
Electronics: Sigma Preamp
Remo CS-0114-10 14″ Controlled Sound Drumhead
The Controlled Sound® Coated Bottom Black Dot™ features focused midrange tones with added durability.
Focused mid range tones with added durability
1-ply 10-mil Coated film and a 5-mil Bottom Black Dot™
Ideal for all Snare drum applications
Available in sizes 6″ – 18″
Center Dot adds durability and overtone control
CAD D29 Cardioid Dynamic Instrument Microphone
The D29 is a cardioid, moving-coil dynamic microphone specifically designed for the capture and reinforcement of tom-tom drums and other acoustic percussive instruments. The cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. Although designed with percussion in mind, excellent results are also obtained when used on most electrical and acoustical instruments The integrated drum clip is designed to facilitate rapid, optimal placement.
Operating Principle Moving-coil dynamic
Polar Pattern Cardioid
Frequency Response 90Hz -13KHz
Sensitivity -53dBV (22mV) @ 1 Pa
Impedance 560 ohms
Max SPL >120dB
Remo BJ-1100-H2 Banjo Head Coated Bottom – High Collar, 11″
The Coated Bottom Banjo Head has the traditional white look with a similar sound to a coated top head but puts the coating on the underside of the head because the smooth top surface is preferred by tenor and plectrum banjoists so it is quieter when strumming.
Grover GR502BC Roto-Grip Locking Rotomatic Tuners, 3-Per-Side, Black Chrome
Grover’s patented locking tuners have eliminated the obstacles of other locking devices. Since there are no external mechanisms to initiate the locking action, the machine head’s appearance is like any other. The entire locking mechanism is self-contained
Grover GR102BC Rotomatic 14:1 3 per Side Tuners, Black Chrome
The original Rotomatic with an improved higher ratio gearing. The 14:1 ratio provides for finer tuning and greater stability.
Original Rotomatic – Closed – Gear ratio 14:1 – 6 pieces: 3pcs left, 3pcs right – Diameter without mounting sleeve – 6mm – Diameter with mounting sleeve – 9.6mm – Available in black chrome, black nickel , in chrome, in matte chrome, in gold color, in matte gold and nickel – Made in USA
Graph Tech PRL-9721-C0 Electric Locking 6 Inline Staggered Post
The PRL-9271-C0 is a set of staggered Post Ratio Locking Tuned Machine Heads for an electric guitar in a 6-in-line configuration. They have 3 different heights, contemporary buttons, a 2-pin casing and are finished in chrome
RATIO® patented gear technology
RATIO® – Calibrated Machine Heads incorporate different string gauges into the tuning equation.
From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.
We balanced the gear ratios to each string simplifying the tuning process.
With RATIO®, a half turn is a semi-tone!
Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.
The PRL-9721 is a right-handed set of Locking RATIO® Calibrated Machine Heads for electric guitar that use 6-in-line tuners with staggered posts (eliminates the need for a string tree).
It has a two pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates [opens in new tab].
4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes.
6-in-line tuners set Staggered tuners set Ratio Tuned Machine Heads: The New Standard In Tuning Technology
Gear ratio: unique for each string position – one turn-one tone
Peg holes diameter required: 13/32″ (10mm)
String post diameter: 0.236″ (6mm)
String post length to string hole: 0.827” (21mm) – 0.787″ (20mm) – 0.748″ (19mm)
Weight per single machine head: 0.083lbs (38g)
Weight per set of six: 0.496lbs (225g)
String diameter up to 72 gauge
Includes 6 machine heads, mounting screws and bushings
Includes complimentary 4 sets of aluminum mounting plates
Graph Tech PRL-8331-B0 3+3 Ratio Classic Style Electric Locking Machine Heads, Black
The PRL-8311, 8322, 8331, 8341 are a right-handed sets of Locking RATIO® Calibrated Machine Heads for electric guitar that use 3 x 3 tuners, such as Gibson style and PRS style guitars. A great upgrade over a single gear machine heads, such as Grover, Schaller, Sperzel, Kluson, etc. RATIO® patented gear technology RATIO® – Calibrated Machine Heads incorporate different string gauges into the tuning equation. From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1. We balanced the gear ratios to each string simplifying the tuning process. With RATIO®, a half turn is a semi-tone! Every string reacts the same to any tuning adjustment. Predictable, precise tuning, on every string.
Gear ratio: unique for each string position – one turn-one tone
Peg holes diameter required: 13/32″ (10mm)
String post diameter: 0.236″ (6mm)
String post length to string hole: 0.910” (23mm)
Weight per single machine head: 0.083lbs (38g)
Weight per set of six: 0.496lbs (225g)
String diameter up to 72 gauge
Includes 6 machine heads, mounting screws and bushings
Includes complimentary 4 sets of aluminum mounting plates