Traynor YGM-4 Studio Mate Amplifier (CI)
A vintage tube amp from the 70’s in excellent working condition. Has been completely reconditioned by a professional tube amp specialist in the United States. Everything on this amp is working great including the beautiful built-in foot-switchable tremolo circuit. Two EL84’s drive four 10″ speakers with a spring reverb (also foot-switchable) as well as a treble boost with a 2-band EQ.
Laney IRT30-112 Ironheart- Modern sounding 1 x 12” combo, high gain, lots of smooth compression w/plenty of low-end growl and punch.Featuring a full 3-channel pre-amp with clean, rhythm and lead channels, plus a footswitchable pre-boost section.
FORGED DEEP IN THE BLACK COUNTRY
A thoroughly modern sounding 1 x 12” combo, high gain, lots of smooth compression and packed full of features, the IRT30-112 is an extremely versatile, aggressive sounding combo delivering plenty of low-end growl and punch. Featuring a full 3-channel pre-amp with clean, rhythm and lead channels, plus a footswitchable pre-boost section. The IRT30-112 also features a variwatts control, which allows you to get the tone you are after at any wattage level without compromising your tone.
DETAILS
The Vari-Watts control the signal level within the power amplifier, allowing it to be driven harder at lower volume levels. For full output power, running the power tubes at maximum levels, turn this control fully clockwise. To reduce output volume, turn this control to the left.
On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life.
Pulling on each of the EQ control knobs will shift the response of each control as follows: Bass: Deep – This extends the low-end frequency response, resulting in a fuller, heavier sound for lower notes. Mid: Shift – This lowers the frequency range of the mid control to give a tighter sound. Treble: Shift – This broadens the Treble control frequency response, to give a rounder sound to higher notes, especially when used with thin sounding pickups.
KEY FEATURES
30 watts RMS
3 channels + switchable boost
Modern High gain sounds
MP3/AUX in
Dynamics control
Pre-Boost function
Premium Hand selected ECC83 & 6L6 tubes
FX loop series/switchable level
FS4-IRT included
Studio quality digital reverb
1 x 12” HH designed custom drivers
Switchable cabinet emulation
Extension speaker socket: 1 x 8/16 Ohm
https://youtu.be/qlVEyNDXi_U
Joyo AC-20 Rechargeable Guitar Amplifier w/Built-in Effects-20 Watts output. B/I chorus, delay & reverb.
JOYO AC-20 Acoustic Amplifier AUX input 3 DSP effects Chorus Delay and Reverb
The Joyo AC-20 is an amplifier designed with an amplification characteristic curve circuit specifically for acoustic guitars.
The acoustic amplifier gives you a nice and bright treble with rich mid -low frequencies. Its 20W of power (10W + 10W) will meet your needs for practice sessions at home up to even small live shows.
The guitar section of the AC-20 features 3 built-in DSP effects: Chorus, Delay and reverb, and all of which can be used simultaneously which is very rare among similar amplifiers. The other section on the AC-20 is the well designed dynamic. Microphone amplification channel giving you a clear and powerful vocal sound, this channel also features a reverb, which is the key making your vocals shine.
Any great acoustic amp has an AUX input and so does the AC-20. Connect your external sound device to the aux in and you can jam along to your music. Joyo have delivered a truly simple and practical acoustic guitar amp, perfect.
On the guitar control your EQ with Treble, Middle, Bass adjustment and dial in three independent built-in digital effects of Chorus, Delay (Max delay time up to 500ms) and Reverb Volume Control.
On the Mic, its all about simple tone adjustment with reverb effect and microphone volume control. Note: the JOYO AC-20 can support only moving-coil Microphones.
Speaker Two 5-inch speakers special for acoustic amps
AC Power adapter Input: AC 100V-250V, 50-60Hz
Jet City Custom 5 Watt Tube Head
Custom 5 has 2 12AX7 Preamp tubes and 1 Power tube. It comes with a 6L6 installed, which can be user-replaced with an EL34, without adjusting the bias of the amp. Just plug and play.
Also featured is our Mojo Tone solid state effects loop – the same loop as featured in 20HV – which is optimized to work with effects pedals.
You can choose speaker outputs at 4, 8, and 16 ohms.
Normal operation is at 5 watts, with a 2 watt mode.
Transformers are big, heavy iron, including a choke.
Controls:
Preamp Gain
BRIGHT pushbutton
Bass Boost / Mid Boost Tone switch.
TREBLE, MIDDLE, BASS EQ
MASTER volume
POWER: 5 or 2 watts via Pentode/triode mode
Black chassis comes with 6L6 installed. White chassis with EL34 installed.
https://youtu.be/W5S-ZFxkTm8
Jet City Custom JCA20H Dual Channel 20W Tube Head
20H was our first-ever product, launched in September of ’09. It was based on the Soldano Atomic 16, which Soldano had discontinued due to high US production cost and dwindling sales. When we launched at $399 though, we shattered our own expectations and moved thousands of them. This lead to the two-channel 22H, the single-channel Joe Perry requested 20HV and the Martin Kidd voiced Custom 22.
The champion amongst all of these was the 22H. Basically the feature set of the SLO100 in a small 20 watt amp, it outsold all our other 20 watt offerings by far, and inspired us to create the new Custom 2.X.
22H:
We added an overdrive channel, along with a tube-buffered, serial effects loop to our popular 20H. JCA22H is elegance in design both inside and out, delivering unflinching reliability and everything you’d want in an amp. With full EQ control and separate preamp gain and master volumes, the JCA22H can deliver crunchy cleans all the way through saturated high-gain overdrive.
